Ural-Daihatsu

On-going, finished, abandoned builds & questions galore..

Moderators: Dan J, Stuart, Diesel Dave, Crazymanneil

User avatar
Tetronator
I luv the smell of Diesel...
Posts: 474
Joined: Mon Apr 07, 2014 11:50 am
Location: Amsterdam
Contact:

Re: Ural-Daihatsu

Post by Tetronator » Sun Apr 17, 2016 3:30 pm

Man, I seem to have opened some can of worms here. :roll:
"...the fearless Dutchman..." -Stuart
"...the mad Dutchman..." -Diesel Dave

Honda VT600 C Shadow
Image
H̶o̶n̶d̶a̶ ̶C̶B̶R̶6̶0̶0̶F̶2̶
Image
Mercedes-Benz W123 300D Sedan
Image

mark_in_manchester
I luv the smell of Diesel...
Posts: 264
Joined: Mon Mar 19, 2007 9:04 am
Location: Manchester, NW England, UK

Re: Ural-Daihatsu

Post by mark_in_manchester » Tue Apr 26, 2016 10:43 pm

Alright, 'heavy duty' donut, came, is installed, and works so far. Passenger peg swing-arm bump stops are back on to help prevent donut being mis-aligned. Also, it becomes apparent that I have lengthened the frame by 5 or 6mm more than I had to, to accommodate the Dnepr 'box, and the last donut was therefore a little loose on the pegs which locate in it. So I have moved the circlip along to the next groove of the splined end of the drive shaft, to try to keep both sets of pegs (driving, and driven) deeply engaged in the donut. Actually it would move up another notch, but this last groove is rather knackered on my shaft so I may make something more substantial than just the circlip to fit around the shaft and keep the donut lightly squashed between the flanges of the two sets of prongs which engage with it. We'll see.

Post Reply