Track T800

Bike and Parts, For Sale, Wanted, and For Trade.

Moderators: Dan J, Stuart, Diesel Dave, Crazymanneil

Track T800

Postby grahew » Sun Aug 06, 2017 7:55 am

Hi I know its a long shot but has any body got or know where to buy body panels for the Track T800, iam looking for a complete nose cone

Thanks
grahew
I don't post much...
 
Posts: 4
Joined: Wed Oct 10, 2012 8:31 am
Location: Worcestershire uk

Re: Track T800

Postby Bert in Weesp » Sun Aug 06, 2017 11:53 pm

The company behind http://schurgersdesign.com/nl/project/p ... kuipdelen/ says on it's site that they were involved in designing the panels and making a "null" series.
You can contact them by mail on info@schurgersdesign.com and ask if they still do something for the bike.
1 "but" , they talk about fiberinforced polyester but on the production machines that goed only for the instrument panel , the rest is plastic ABS, not PP.
If youhave a cracked nose cone it's reasonably reparable by a hot soldering iron, some small extra fragments of ABS and practice.....
Bert in Weesp
Been here a while now..
 
Posts: 23
Joined: Sun Jun 22, 2014 11:26 pm
Location: Weesp NL.

Re: Track T800

Postby Bert in Weesp » Sun Aug 06, 2017 11:59 pm

You might try e-mailing informatie@e-one.nl
They have some parts there, don't know which.
Bert in Weesp
Been here a while now..
 
Posts: 23
Joined: Sun Jun 22, 2014 11:26 pm
Location: Weesp NL.

Re: Track T800

Postby gilburton » Mon Aug 07, 2017 8:31 am

If the panels are repairable I can recommend this stuff . Forget glues/welding etc.
I found the best way with cracks is to tape one side to keep it aligned(as in the video) then groove out the opposite side with a dremel(rotary mini tool) but don't go all the way through just widen the crack.
Shake the granules along the crack and using an eye dropper or small squeezy bottle drop the liquid along the granules until they are wet.
If you just mix it as in the video you will waste it.
Once hard remove the tape and groove out the other side and repeat.
You can finish it off with a plastic filler such as bumper repair or similar.
You can remake missing tabs etc. using plasticine as a mould.I used aluminium tape as it is stiff so can be also used as a mould. I think parcel tape(as in the video) could leave adhesive.
Basically it forms a liquid plastic and there are better videos on the internet than these although the product names are different.

http://plast-aid.co.uk/
gilburton
I luv the smell of Diesel...
 
Posts: 699
Joined: Sat Apr 21, 2007 11:35 am
Location: UK northants

Re: Track T800

Postby Pawel » Wed Sep 20, 2017 11:38 am

Good morning Gentlemen
Did you found any source of pannels for Track T-800? Where to get them?

Thanks
Pawel
I don't post much...
 
Posts: 1
Joined: Thu Sep 14, 2017 8:00 am
Location: Poland


Return to Classified Section

Who is online

Users browsing this forum: No registered users and 1 guest

cron